Pressure Calibration
Pressure calibration is the comparison of the output of a device used to measure pressure with that of another pressure measurement device, or pressure measurement standard. This usually involves plumbing the device under test (DUT) to the standard device and generating a common pressure in the measurement circuit.
In our pressure calibration laboratory, we use fundamental pressure standards, such as piston gauges, with traceability through a national metrology institute. We can calibrate all secondary/ working level instruments such as Dead Weight Testers (Gauge/ Absolute/ Vacuum), Pressure calibrators, Test Gauges and Pressure Transmitters/ Gauges ranging from small pressures of only a few Pascal up to high pressures up to 2000 bar.
Offerings | Technical Specification | Description |
---|---|---|
Hydraulic Pressure gauges/ Switches /Transmitters/ Transducers | 0 to 1000 bar | Using Digital Pressure Gauge with Hydraulic comparator by comparison method, as per DKDR6-1 |
Hydraulic Pressure gauges/ Switches /Transmitters/ Transducers | 0 to 200 bar | Using Digital Pressure Gauge with Hydraulic comparator by comparison method , as per DKDR6-1 |
Hydraulic Pressure gauges/ Switches /Transmitters/ Transducers | 0 to 30 bar | Using Digital Pressure Gauge with Hydraulic comparator by comparison method , as per DKDR6-1 |
Hydraulic Pressure gauges/ Switches /Transmitters/ Transducers | 0 to 4 bar | Using Test Gauge with Hydraulic comparator by comparison method , as per DKDR6-1 |
Negative PressureVacuum gauges | (-) 0.8 bar to 0 | Using Digital pressure gauge/ Vacuum pump By comparison method as per DKDR6-1 |
Pneumatic Pressure gauges/ Switches /Transmitters/ Transducers | 0 to 30 bar | Using Digital Pressure Gauge with Pneumatic comparator by comparison method , as per DKDR6-1 |
Pneumatic Pressure gauges/ Switches /Transmitters/ Transducers/Magneh elic gauge/ Manometers | 0 to 0.34 bar | Using Digital manometer by comparison method , as per DKDR6-1 |
Offerings | Technical Specification | Description |
---|---|---|
Hydraulic Pressure gauges/ Switches /Transmitters/ Transducers | 0 to 1000 bar | Using Digital Pressure Gauge with Hydraulic comparator by comparison method , as per DKDR6-1 |
Hydraulic Pressure gauges/ Switches /Transmitters/ Transducers | 0 to 200 bar | Using Digital Pressure Gauge with Hydraulic comparator by comparison method , as per DKDR6-1 |
Hydraulic Pressure gauges/ Switches /Transmitters/ Transducers | 0 to 30 bar | Using Digital Pressure Gauge with Hydraulic comparator by comparison method , as per DKDR6-1 |
Hydraulic Pressure gauges/ Switches /Transmitters/ Transducers | 0 to 4 bar | Using Test Gauge with Hydraulic comparator by comparison method , as per DKDR6-1 |
Negative Pressure- Vacuum gauges | (-) 0.8 bar to 0 | Using Digital pressure gauge/ Vacuum pump By comparison method as per DKDR6-1 |
Pneumatic Pressure gauges/ Switches /Transmitters/ Transducers | 0 to 30 bar | Using Digital Pressure Gauge with Pneumatic comparator by comparison method , as per DKDR6-1 |
Pneumatic Pressure gauges/ Switches /Transmitters/ Transducers/Magneh elic gauge/ Manometers | 0 to 0.34 bar | Using Digital manometer by comparison method , as per DKDR6-1 |